|
||
GraphiCut driver for ProDeSIGN Newer revisions of ProDeSIGN have a utility in the root directory of the CD with 3 files named newplotter1, newplotter2, and newplotter3. Depending onn which version of prodesign you have (level I, II, or III) double click on newplotter 1,2,or3, and this will load the GraphiCut driver into the ProDeSIGN plotter list. Skip to step 2. If these do not exist on the CD, then follow the following instructions: 1) Download the driver. Right Click Here, and select Save Target As. Copy it to the OutputDrivers folder of the ProDeSIGN software (ie: c:\Program Files\ProDeSIGN 3 7.5v5\OutputDrivers)
2) Open the Production Manager in ProDeSIGN click SETUP>ADD SETUP
Click SETUP>ADD SETUP
Select the GraphiCut Driver and
click
click Select the port and click
Once the driver is loaded, select it and click SETUP>DEFAULT JOB PROPERTIES
Click on the cutter tab (3rd from the left), and check the box next to Knife Offset. Enter .013 in the dialog box to the right, then click the OK button.
The GraphiCut plotter should be ready to use.
|
.
